|
|
RANDY ELLIS DESIGN |
|
|
|
SUPER DUTY/ EXCURSION LIGHT BAR
|
04-05 F-150 NEW BODY STYLE LIGHT BAR INSTRUCTIONS PART
# 2105 2.
INSTALLATION KIT SHOULD CONTAIN:
2) 5/8 BOLTS, NUTS AND LOCK
WASHERS
2) ½ THICK SPACERS
2) 3/16 SPECIAL WASHERS 3.
IN THE OPENING OF THE BUMPER REMOVE THE PLASTIC FILLER PANELS ON EACH
SIDE. 4.
NOTICE THE LARGE HOLES IN THE FRAME BRACKETS BEHIND THE FILLER PANELS.
THE LIGHT BAR BOLTS THROUGH THESE HOLES. 5.
HOLD THE LIGHT BAR UP TO THE FRAME WITH THE HOLES IN THE LIGHT BAR
BRACKETS ALIGNED WITH THE HOLES IN THE FRAME. 6.
INSERT THE ½ INCH SPACER BETWEEN THE FRAME AND THE LIGHT BAR BRACKET. 7.
INSERT THE 5/8 BOLT THROUGH THE LIGHT BAR BRACKET, ½ INCH SPACER AND
THEN THE FRAME. 8.
ON THE BACK SIDE OF THE FRAME SLIDE THE 3/16 SPECIAL WASHER ON THE 5/8
BOLT. 9.
START THE 5/8 LOCK WASHERS AND NUTS HAND TIGHT. 10.
ALIGN THE LIGHT BAR SIDE TO UNTIL CENTERED. 11.
TIGHTEN THE HARDWARE. 12.
INSTALL THE LIGHTS OF YOUR CHOICE AND ENJOY. 2855
W FAIRMOUNT AVE PHOENIX, AZ 85017 602-803-1122 EMAIL:
TO HELP ELIMINATE SPAM, PLEASE RE-TYPE THE EMAIL ADDRESS INTO AN EMAIL. THANKS!
U.S. DESIGN PATENT NO. D521,923
|
|
|
