|
|
RANDY ELLIS DESIGN |
|
|
|
SUPER DUTY/ EXCURSION LIGHT BAR
|
SLEEKSTER LIGHT BAR BY RANDY ELLIS DESIGN 05’
TACOMA INSTRUCTIONS PART
# 5205
1.
Locate the aluminum structural beam that runs from drivers side frame
rail to the passenger side frame rail behind the bumper cover. 2.
Remove the two outer nuts that hold the aluminum structure to the frame
on both the passenger side and the driver’s side. Do not remove the two inner
nuts. Do not discard the nuts, as they will be reused. 3.
Position the light bar brackets over the two studs on each side that you
removed the nuts from. 4.
Reinstall the nuts on each stud and tighten. 5.
Install the lights of your choice and enjoy! Thank you for purchasing quality products from Randy Ellis Design, Inc. 2855 W. Fairmount Ave. Phoenix, AZ 85017 602-803-1122 EMAIL: TO HELP ELIMINATE SPAM, PLEASE RE-TYPE THE EMAIL ADDRESS INTO AN EMAIL. THANKS!
U.S. DESIGN PATENT NO. D521,923
|
|
|
