|
|
RANDY ELLIS DESIGN |
|
|
|
SUPER DUTY/ EXCURSION LIGHT BAR
|
SLEEKSTER
LIGHT BAR BY
RANDY ELLIS DESIGN 97-03
F-150 INSTALLATION INSTRUCTIONS PART # 2205 1.
Take a look at the front of the truck and notice the tow hooks. 2.
Your new light bar will mount between the tow hooks and the frame. 3.
Each tow hook is held in place by 2 bolts and a nut plate inside
the frame. 4.
Remove the forward bolt from the tow hook on each side. 5.
Loosen the rearward bolt enough to slide the light bar mount in
between the hook and frame. Do not remove the bolt completely! 6.
Line up the forward hole in the light bar bracket, the hook and
the frame. Note: you can turn the rearward bolt to line up the nut plate inside
the frame. 7.
Start the forward bolt by hand on each side. 8.
Tighten all bolts. 9.
Install the lights of your choice and enjoy! THANK YOU FOR PURCHASING QUALITY PRODUCTS FROM RANDY ELLIS DESIGN, INC. 2855 W FAIRMOUNT AVE. PHOENIX, AZ 85017 602-803-1122 EMAIL:
TO HELP ELIMINATE SPAM, PLEASE RE-TYPE THE EMAIL ADDRESS INTO AN EMAIL. THANKS!
U.S. DESIGN PATENT NO. D521,923
|
|
|
