H2 INSTRUCTIONS

2855 W. FAIRMOUNT AVE

PHOENIX, AZ 85017

SHOP (602) 803-1122

FAX (602) 277-4649

Sleekster Light Bars by Make:

Save Some $$$ and Check Out Our:

H-2 LIGHT BAR INSTRUCTIONS

PART # 6005

U.S. DESIGN PATENT NO. D521,923

1. REMOVE THE PLASTIC FILLER PANNEL UNDER THE GRILL.

2. IF YOUR TRUCK HAS THE FACTORY GRILL GUARD SKIP TO STEP 8.

3. NOTICE THE HOOD HINGES AND THIER EMPTY THREADED BOLT HOLES; THIS IS WHERE THE LIGHT BAR ATTACHES.

4. POSITION THE LIGHT BAR BRACKETS TO LINE UP WITH THE EMPTY THREADED HOLES.

5. START THE SUPPLIED 10X1.50MM BOLTS THROUGH THE LIGHT BAR BRACKETS AND INTO THE HOOD HINGES.

6. TIGHTEN THE 4 BOLTS.

7. “POP” THE PLASTIC FILLER PANNEL BACK INTO PLACE.

8. IF YOUR TRUCK HAS A FACTORY GRILL GUARD: HOLD THE GRILL GUARD IN PLACE AND REMOVE THE 4 BOLTS ATTACHING IT TO THE HOOD HINGES.

9. POSITION YOUR NEW LIGHT BAR SO THE BRACKETS ARE ON TOP OF THE GRILL GUARD BRACKETS.

10. START THE 4 FACTORY BOLTS THROUGH THE LIGHT BAR BRACKETS, GRILL GUARD BRACKETS AND INTO THE HOOD HINGES.

11. TIGHTEN THE 4 BOLTS.

12. “POP” THE PLASTIC FILLER PANEL BACK INTO PLACE.

INSTALL THE LIGHT OF YOUR CHOICE AND ENJOY!

THANK YOU FOR PUCHASING QUALITY MADE PRODUCTS FROM RANDY ELLIS DESIGN, INC.

602-803-1122 WWW.RANDYELLISDESIGN.COM