Dodge RAM PowerWagon Light Bar - 34203 2019-2022
Dodge RAM PowerWagon Light Bar - Dodge Ram Bar -
Sleekster light bar #34203 is made to fit all 2019 thru 2022 Dodge RAM Power Wagons.
#34203 is a four tab bar and is available in satin black powder coat only. Sleekster light bars are durable, frame mounted and rigidly hold your choice of lights. You can mount 4 lights up to 9” in diameter with ease. The light bar is made from CNC mandrel bent 1 ¾” .120 wall steel tube, CNC cut and formed brackets and light tabs. These light bars are finished with high-quality powder coat and require absolutely no drilling, cutting or welding. Bolts on using factory mounting locations and is compatible with factory tow hooks.
If you're looking to mount an LED light bar, select one of our adapter brackets from the drop down menu below.
ram power wagon accessories - light bars dodge ram - ram bar lights - dodge light bars
you'll also like...
FLEX ERA® 4 - 2-LIGHT SYSTEM
High intensity meets robust construction, the KC® FLEX ERA® 4 is the newest addition to an all-new family of next-generation lighting. Packed with industry-leading CREE® LED technology and featuring an awesome 7,912 TRUE-LUMENS™, the FLEX ERA 4 is built to keep pushing through the night, on the toughest of trails and longest of races. Adventure Further®!
-Independent Amber LED Backlight
-Signature KC FLEX Aesthetic
-Machined Accent Bezel
-Customizable Beam Patterns and Trim Colors (Sold Separately)
-Thermal LED Protection
LIGHT PERFORMANCE (PER LIGHT)
-RAW Lumens: 7,912 lm @5000K
-LUX @ 10 meters: 1,610 lx
-Candela: 161,000 cd
-Beam Distance (Meters): 401m
-Beam Pattern: Combo
SPECIFICATIONS (PER LIGHT)
-LED Source: CREE® LED XHP 50.2
-Amp Draw: 6.7A @ 12V
-IP Rating: IP68
-Product Dimensions: W - 5.0" x H - 5.0" x D - 3.27"
-(2) 80W KC® FLEX ERA® 4 LED Lights
-(2) Light Covers - Black with Yellow KC Logo
-Wiring Harness and 3 position switch
2500/3500 Dodge Crew Cab Rock Sliders Body Armor #ROCK3405
THEY CAN BE SHIPPED VIA FREIGHT, PLEASE CONTACT FOR QUOTE.
Any weekend and weekday installations are subject to availability.
Please call to schedule a day and time for installation.
THESE ROCK SLIDERS ARE CURRENTLY ON BACKORDER AND REQUIRE A 50% DEPOSIT TO BE PUT ON THE LIST - PLEASE CALL TO PLACE YOUR ORDER
Sleekster Rockers Body Armor For 2010- 2022 Dodge Crew Cab Trucks and 2009 Dodge 1500 Crew Cab Trucks!
**ANY CUSTOMIZATION IS A MINIMUM UPCHARGE OF $850.00**
Jeep guys have been getting the benefits of body-mounted rocker protection forever, and now truck owners can too! Lose NO precious ground clearance, gives you a place to jack your truck, and will not rattle bang, or flex like frame-mounted rock sliders, rocker guards, and nerf bars. Rocks slide easily on the smooth surface and no tubes to get rocks stuck between. No welding or cutting! These will require an air-powered rivet gun to install as they are solidly mounted with 3/16" high-strength alloy rivets. Sleekster Rockers are something new and different for trucks. Trucks are evolving and the parts and accessories need to as well. Sleekster Rockers are an alternative to welding tube sliders to your frame. They will give you more ground clearance and do not have large voids to hang up on rocks and things. They also will not flex and bang your body when running high speed off-road. The Sleekster Rockers are a formed structural member that distributes the weight over the strongest part of the body, they hug the basic shape of your existing sheet metal rocker panel and do not hang below it. The frame on your truck is made of roughly .125 material (and newer trucks are even thinner) and most guys think this is very strong, and it is when in a formed shape of a rectangle or what people like to call "boxed". Most guys like to think if they weld something to the frame it is then strong as well? The frame of your truck is not magic or made of an exotic material impervious to damage, it is just mild steel. If you weld tube sliders to your frame then the slider has leverage to flex the frame. The slider basically has to flex up until it hits the body when you jack or land on a rock. The body is supporting the weight OR the tube slider will continue to flex up 1-2 inches or more if the body is not there to stop it. This means the tube slider needs to be mounted over an inch below the lowest part of the body to keep from hitting the body. It is fine if the slider has a tube that matches the pinch weld and it is supported the entire length of the body, then it will support the weight of the vehicle. If your tube sliders come out from the frame and cross the body in a few spots, the slider will flex up and dent the body where the tubes cross it. Either way, you will lose at least 3" of ground clearance, and you will lose less than 1/4" with our Rockers. Our Sleekster Rockers are made from certified USA made A1011 .130 thickness material (thicker than most truck frames on the road and the same material or better). It is like adding a frame rail to the rocker portion of the truck, the Sleekster Rockers are a formed structural member that when attached to the body become one and very strong. Also think of it as if you cut your rocker out and welded a 4x4 .120 square tube in its place as long as it is attached to the body and supporting the entire distance it would be very hard to dent that tube or damage the body. A lot of "hard core" guys will actually cut out their rocker and replace it with tube and some will even raise this area and replace it with steel plate commonly known as "boat siding". Another way to think of it is like early Jeep guys bolting angle iron to the side of their Jeep. Now the newest Jeep Wranglers have multiple designs available to bolt to the side of their Jeeps, at the "pinch weld". The pinch weld is just where the upper portion and lower portion and sometimes a 3rd floor portion all come together and are pinched together and welded usually with dozens of spot welds, this is by far the strongest part of the body.
These Rockers fit 2010-Current Dodge Crew Cabs as well as 2009 Dodge 1500 Crew Cabs, and are available in Satin Black powder coat. They are also available with a Tube Rail option for an additional charge.
IMPORTANT NOTE: Will only fit crew cabs with 6'4" bed only!
If you choose install, please call to schedule a day and time at 602-803-1122, thank you.
ALL SALES ARE FINAL!
KC HiLiTES LED BAR W/ HARNESS COMBO (EA)
**Current ship times for KC is 2 weeks**KC HiLiTES C-Series LED Light Bars feature bright and efficient CREE LED's with combo 8° Spot and 90° Spread reflectors. Available in 20"-40" widths.
-6"to 50" C-SERIES LED Dual Row Light Bar
-Precision reflectors with forward facing LED's
-Combo Beam Pattern: 8° Spot & 90° Spread
-Extruded Aluminum Housings
-GORE® Membrane Barrier
-RAW Lumens: 6"= 3,240 lm, 10"= 5,400 lm, 20"= 10,800 lm, 30"= 16,200 lm, 40"= 21,600 lm, 50"= 27,000 lm
-LUX @ 10 meters: 6"= 230 lx, 10"= 680 lx, 20"= 1,750 lx, 30"= 2,050 lx, 40"= 2,800 lx, 50"= 3,200 lx
-Candela: 6"= 23,000 cd, 10"= 68,000 cd, 20"= 175,000 cd, 30"= 205,000 cd, 40"= 280,000 cd, 50"= 320,000 cd
-Beam Distance (Meters): 6" = 303m, 10"= 522m, 20"= 837m, 30"= 906m, 40"= 1,058m, 50"= 1,131m
-LED Source: CREE LED
-Amp Draw: 3.0A-25.0A
-IP Rating: IP67
-Product Dimensions: 20" = L - 21.38" x H - 3.09" x D - 3.40"; 30" = L - 31.38" x H - 3.09" x D - 3.40"; 40" = L - 41.38" x H - 3.09" x D - 3.40"
Parts Included with C-SERIES Light Bars
-Deluxe Wiring Harness w/ 2-Pin weather proof connectors
-Die-Cast Mounting Brackets with hardware
PERFORMANCE OUTPUT AND CLARITY
The C-Series uses an advanced dual row CREE LED design delivering up to 27,000 lumens of output with maximum power efficiency. Coming in various sizes KC HiLiTES C-Series LED Light bars are perfect for hood, front bumper, windshield and grille applications providing balanced and powerful light illumination.
HIGH PERFORMANCE MEETS AFFORDABILITY
C-Series light bar features an extruded aluminum housing, aluminum core PCBs with thermal management and lexan lenses. What you get is a perfect balance of affordable performance with maximum efficiency, stability and reliability.
COMBO BEAM PATTERN AND ADVANTAGES
When it comes to total road coverage the C-Series LED light bar features a combo beam with perfectly angled 8° Spot & 90° Spread reflectors, for maximum forward distance and increased peripheral illumination along road edges.
DESIGNED FOR DURABILITY
Off road race tested, the C-Series was designed to handle the harshest environments. Featuring a IP67 rated housing and GORE® Membranes, the C-Series is resistant to moisture and dust.